External Details For Connunitporttable; Configuring Snmp Event Notification In Smu; Snmp Management; Enterprise Trap Mib - HP P2000 G3 Reference Manual

Storageworks msa system
Hide thumbs Also See for P2000 G3:
Table of Contents

Advertisement

Table 13
connUnitSensorTable index, name, type, and characteristic values (continued)
connUnitSensorIndex connUnitSensorName
28
29
30
31
32
33

External details for connUnitPortTable

Table 14

connUnitPortTable index and name values

connUnitPortIndex connUnitPortName
1
2
3
4

Configuring SNMP event notification in SMU

1.
Verify that the storage system's SNMP service is enabled; see
on page 42.
2.
Configure and enable SNMP traps; see

SNMP management

You can manage storage devices using SNMP with a network management system such as HP System
Insight Manager (SIM), or HP Instant Support Enterprise Edition (ISEE). See their documentation for
information about loading MIBs, configuring events, and viewing and setting group objects.
In order to view and set system group objects, SNMP must be enabled in the storage system; see
management interface settings

Enterprise trap MIB

The following pages show the source for the HP enterprise traps MIB, msa2000traps.mib. This MIB
defines the content of the SNMP traps that P2000 G3 MSA Systems generate.
-- ----------------------------------------------------------------------------
-- MSA2000 Array MIB for SNMP Traps
--
-- $Revision: 11692 $
--
-- Copyright (c) 2008 Hewlett-Packard Development Company, L.P.
-- Copyright (c) 2005-2008 Dot Hill Systems Corp.
-- Confidential computer software. Valid license from HP required for possession,
-- use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer
-- Software, Computer Software Documentation, and Technical Data for Commercial
-- Items are licensed to the U.S. Government under vendor's standard commercial
-- license.
--
--
MSA2000traps MIB Revision
--
==========================
Power Supply 1 Voltage, 5V
Power Supply 1 Voltage, 3.3V
Power Supply 2 Voltage, 12V
Power Supply 2 Voltage, 5V
Power Supply 2 Voltage, 3.3V
Overall Status
Host Port 1 (Controller A)
Host Port 2 (Controller B)
Host Port 1 (Controller A)
Host Port 2 (Controller B)
Configuring SNMP notification
on page 42.
HP StorageWorks P2000 G3 MSA System SMU Reference Guide 129
connUnitSensorType connUnitSensor
Characteristic
power-supply(5)
power(9)
power-supply(5)
power(9)
power-supply(5)
power(9)
power-supply(5)
power(9)
power-supply(5)
power(9)
enclosure(7)
other(2)
Changing management interface settings
on page 43.
Changing

Advertisement

Table of Contents
loading

Table of Contents