•
Status.
•
Controller ID.
I/O module: In port properties
When you select an In port, a table shows:
•
Health.
OK. The port is operating normally.
Degraded. The port's operation is degraded.
Fault. The port has failed.
N/A. Health status is not available.
•
Health Reason.
•
Status.
•
Name.
I/O module: Out port properties
When you select an Out port, a table shows:
•
Health.
OK. The port is operating normally.
Degraded. The port's operation is degraded.
Fault. The port has failed.
N/A. Health status is not available.
•
Health Reason.
•
Status.
•
Name.
Viewing information about a remote system
In the Configuration View panel, right-click a remote system and select View > Overview. The System
Information table shows:
•
The username and network-port IP addresses that are configured on the local system to access the
remote system. The configured password is not shown.
•
Information such as the system name, location, and status that is read from the remote system.
To sign in to the remote system, click one of its IP address links.
104 Viewing system status