Enclosure properties
When you select an enclosure, a table shows:
•
Health.
OK. The enclosure is operating normally.
Degraded. At least one component is degraded.
Fault. At least one component has a fault.
N/A. Health status is not available.
•
Health Reason.
•
Enclosure ID.
•
Vendor.
•
Model.
•
Disk Slots.
•
Enclosure WWN.
•
Mid-plane Serial Number.
•
Part Number.
•
Manufacturing Date.
•
Manufacturing Location.
•
Revision.
•
EMP A Revision. Firmware revision of the Enclosure Management Processor in controller module A's
Expander Controller.
•
EMP B Revision. Firmware revision of the Enclosure Management Processor in controller module B's
Expander Controller.
•
EMP A Bus ID.
•
EMP B Bus ID.
•
EMP A Target ID.
•
EMP B Target ID.
•
Enclosure Power (watts).
Disk properties
When you select a disk, a table shows:
•
Health.
OK. The disk is operating normally.
Degraded. The disk's operation is degraded. If you find no related event in the event log, this may
indicate a hardware problem.
Fault. The disk has failed.
N/A. Health status is not available.
•
Health Reason.
•
Enclosure ID.
•
Slot.
•
How Used.
• AVAIL: Available.
• GLOBAL SP: Global spare.
• LEFTOVR: Leftover.
• VDISK: Used in a vdisk.
• VDISK SP: Spare assigned to a vdisk.
•
Status. Up, Spun Down, Warning, Error, Not Present, Unknown, or Disconnected.
100 Viewing system status