HP P2000 G3 Reference Manual page 125

Table 1 1 FA MIB 2.2 objects, descriptions, and values (continued)
Object
connUnitPortTable
connUnitPortUnitId
connUnitPortIndex
connUnitPortType
connUnitPortFCClassCap
connUnitPortFCClassOp
connUnitPortState
connUnitPortStatus
connUnitPortTransmitter
Type
connUnitPortModuleType
connUnitPortWwn
connUnitPortFCId
connUnitPortSn
connUnitPortRevision
connUnitPortVendor
connUnitPortSpeed
connUnitPortControl
connUnitPortName
connUnitPortPhysical
Number
connUnitPortStatObject
Description
Includes the following objects as specified by the FA MIB2.2 Spec
connUnitId of the connectivity unit
that contains this port
Unique value for each
connUnitPortEntry between 1
and connUnitNumPorts
Port type
Bit mask that specifies the classes of
service capability of this port. If this
is not applicable, returns all bits set
to zero.
Bit mask that specifies the classes of
service that are currently operational.
If this is not applicable, returns all
bits set to zero.
State of the port hardware
Overall protocol status for the port
Technology of the port transceiver
Module type of the port connector
Fibre Channel World Wide Name
(WWN) of the port if applicable
Assigned Fibre Channel ID of this
port
Serial number of the unit (for
example, for a GBIC). If this is not
applicable, returns an empty string.
Port revision (for example, for a
GBIC)
Port vendor (for example, for a GBIC) Empty string
Speed of the port in KByte per
second (1 KByte = 1000 Byte)
Not supported
String describing the addressed port
Port number represented on the
hardware
Not supported
HP StorageWorks P2000 G3 MSA System SMU Reference Guide 125
Value
Same as connUnitId
Unique value for each port, between
1 and the number of ports
not-present(3), or n-port(5) for
point-to-point topology, or l-port(6)
Fibre Channel ports return 8 for
class-three
Fibre Channel ports return 8 for
class-three
unknown(1), online(2), offline(3),
bypassed(4)
unknown(1), unused(2), ok(3),
warning(4), failure(5),
notparticipating(6), initializing(7),
bypass(8)
unknown(1) for Fibre Channel ports
unknown(1)
WWN octet for the port, or empty
string if the port is not present
Fibre Channel ID of the port
All bits set to 1 if the Fibre Channel
ID is not assigned or if the port is not
present
Empty string
Empty string
Port speed in KByte per second, or 0
if the port is not present
invalid(2) for an SNMP GET
operation and not settable through
an SNMP SET operation
See External details for
connUnitPortTable on page 129
Port number represented on the
hardware
0 (No statistics available)