Replication Addresses; Replication Images; Viewing Information About A Subordinate Replication Volume; Replication Properties - HP P2000 G3 Reference Manual

• Primary Volume Name. Primary volume name. If the replication set has a primary-volume conflict, all
associated primary volumes are displayed.
• Primary Volume Serial Number. Primary volume serial number. If the replication set has a
primary-volume conflict, all associated primary volumes are displayed.
• Primary Volume Status. Primary volume status: Online, Offline, Conflict, or N/A.
• Maximum Number of Queued Images. Number of replication images to consider when determining
the next image to replicate. Used only if the On Collision parameter is set to Oldest.
• Maximum Retry Time (Seconds). Amount of time in seconds that the replication volume should retry a
replication operation on any specific image when errors occur. Used only if the On Error parameter is
set to Retry.
• On Error. Error policy to invoke when errors occur during the replication process: Retry or Suspend.
• Link Type. Type of ports used to link the primary and secondary volumes: FC or iSCSI.
• On Collision. Collision policy used to determine the next image to replicate when multiple replication
images are queued: Newest or Oldest.
• Priority. Priority of the replication process on the replication volume: Low, Medium, or High.

Replication addresses

If any remote port addresses are associated with this volume, when you select the Replication Addresses
component, the Replication Addresses table shows each address.

Replication images

If any replication images exist for this volume, when you select the Replication Images component, the
Replication Images table shows information about each image. For the selected image, the Replication
Images table shows:
• Image Serial Number. Replication image serial number.
• Image Name. User-defined name assigned to the primary replication image.
• Snapshot Serial Number. Replication snapshot serial number associated with the image. The replication
snapshot is associated with the replication volume specified in the request.
• Snapshot Name. Replication snapshot name associated with the image. For a secondary replication
image, this value is not filled in until the replication is completed.
• Creation Date/Time. Date and time when the replication image was created on the replication volume.

Viewing information about a subordinate replication volume

The term subordinate replication volume refers to a secondary volume shown as a subcomponent of a
primary volume, or a primary volume shown as a subcomponent of a secondary volume, in the
Configuration View panel.
In the Configuration View panel, right-click a subordinate replication volume and select View > Overview.
The Replication Volume Overview table shows:
• Replication properties for the volume
• The quantity of replication addresses for the volume
• The quantity of replication images for the volume
Select a component to see more information about it.

Replication properties

When you select the Replication component a table shows the volume's replication properties, including
the volume's name, serial number, status, status reason, monitor interval, and location (local or remote);
primary volume name, serial number, and status; maximum number of queued images, maximum retry
time, error policy, collision policy, link type, and priority.
Replication addresses
When you select the Replication Addresses component a table shows the remote FC or iSCSI port
addresses associated with this volume.
HP StorageWorks P2000 G3 MSA System SMU Reference Guide 119