Remote Administration - Panasonic KX-TVP150 User Manual

48 0
Remote Administration _
The System Administrator sets up system parameters or
executes the system diagnostic program by using the
RS-232C port. However, the System Manager can also do
such administration from long-distance via a telephone
line, if a modem is connected to the VPS or an optional
modem card is installed in the VPS. You can also set the
parameters using batch files.
Note: Make sure your modem conforms to Bell 103 or 212A
standard, and protocol (Baud rate, Word bit length, Parity
and Stop bit length) is set to RS-232C standard.
The VPS modem is always in answer mode.
Note: Refer to the Operating Instructions for the data terminal
and modem you use on how to use the modem.
Confirm the connection between the modem and the VP&
and the modem and data terminal. Connect the telephone
line to Port 1.
(Voice Mail Service
1
Extension Number)
Dial the extension assigned to Port 1 of the VPS.
You will hear the prompt:
Good morning/Good afternoon/Good evening.
You he reuched the voice procemirzg system.
2
Press the star [*I, then enter the System Manager's mail-
(System Manager's
box number.
mailbox number)
Note: If Port 1 is not set to Voice Mail service, instead of
["1P1P1P1~
input ~w1[91[91[91-
Manager's Guide
System Manager
M-4-65