Table of Contents
Advertisement
12 0
Setting Message Waiting
Notification
.:
.+
.',
,
1.2.5
11
Enter the telephone number to be called.
You will hear the prompt:
This telephone number is -.
To change the telephone number, press [I].
To accept, press [2/.
To review, press [3].
To add more digits to the telephone number, press [4].
To insert a pause, press [S].
To set dial mode, press [6].
To insert a wait for dial tone, press (71.
ABC
l2
cl
Press [2] to accept the number.
2
Specifying the Notification
Method
Subscribers choosing notification by direct call can specify
a telephone or a pocket beeper as the destination for noti-
fication calls. If the destination is a telephone, the VPS will
call, play a message stating that there are messages waiting,
prompt the subscriber to enter his or her password and,
once the password has been entered correctly, play the
messages in the mailbox. If the destination is a pocket
beeper, the VPS will call and terminate processing. How-
ever, if the subscriber has not retrieved his or her messages
within 30 minutes, the system will call the beeper once
again. This process is repeated seven times or until the
messages are retrieved.
To specify the notification
method:
1 -
11
Same as Setting the Telephone Number to be Called.
ABC
l2
cl
Press [2] to accept the number.
'
2
Subscriber 's Guide
U-l-29
Advertisement
Chapters
Table of Contents
