Corner Thin/Wide Box Mounting - Ganz ZC-PT SERIES Installation Manual

4.5.2

Corner Thin/Wide Box Mounting

Items Needed:
•
Dome Camera
•
Data Cable (supplied)
•
Ethernet Cable (IP Dome Camera)
•
Standard/Compact Pendent Mount and equipped items (optional
accessory)
•
Corner Thin/Wide Box (optional accessory)
•
Indoor Mount Adapter (optional accessory)
•
Screws and Screw Anchors for fixing the Corner Thin/Wide Box (not
supplied)
Tools Needed:
•
Tool for drilling
•
Tool for screwing
Follow the steps below to mount the Dome Camera with the Corner
Thin/Wide Box and Standard/Compact Pendent Mount.
1) Make a cable entry hole on the wall to recess the cable(s).
2) Fix the Corner Thin/Wide Box on the corner of the wall with proper screws
and screw anchors. Then run the cable(s) through the hole on the Corner
Mounting Plate with the Data Cable's 22-pin cable coming out.
3) Fasten the Standard/Compact Pendent Mount onto the Corner Thin/Wide
Box with the supplied screws and washers. Then thread the cable(s)
through the Standard/Compact Pendent Mount with the cable(s) coming
out of the Pendent Mount's outlet.
4) Thread the cable(s) through the Indoor Mount Adapter and join the Indoor
Mount Adapter to the Standard/Compact Pendent Mount with the supplied
screws and washers.
5) Connect the cable(s) to the Dome Camera.
6) Attach the Dome Camera to the Indoor Mount Adapter, aligning the
adjustable screw of the Plastic Fixing Plate with the mating screw hole on
the Indoor Mount Adapter, and screw them tightly. See section
Straight Tube
40
NOTE: Please block the cable entry hole with the supplied sponge
to avoid insects entering the Pendent Mount. See the illustrations
in section 4.4.1 Compact Pendent Mount > Step 4.
for illustrations.
Installation Guide
4.3.2