Mounting The Camera; Figure 21: Back Cover Screws And Sealing Washer; Figure 22: Camera With Base Mount And Axis Mount; Figure 23: Solar Shroud With Stem Bumpers - Ganz Thermal Series User Manual

Fixed mount, fixed focus thermal ip and analog camera

Table of Contents

Ganz

Thermal

Series User Manual

Figure 21: Back Cover Screws and Sealing

Washer

Figure 23: Solar Shroud with Stem

Bumpers

4.6

MOUNTING THE CAMERA

1. The Ganz Thermal camera can be mounted on a standard 3-hole bracket or 4-hole

bracket. WatchMaster

offered as additional accessories. For a tripod mount, use the WatchMaster

Tripod Adapter which is also offered as an accessory.

2. For standard 3-hole mount, secure the Camera Base Mount to the standard 3-hole

bracket (not provided) using #1/4-20 screws (not provided).

3. For a standard 4-hole mount and , first secure the optional 4-hole mount adapter to

the base mount.

4. Position the assembled Camera's 4-hole mount adapter onto the bracket and tighten

the Metric M5 Screws (provided only with official WatchMaster

accessories). Using a hex wrench, loosen the bracket adjustment screw to aim the

camera to the point of interest.

IP Wall and Ceiling Brackets and Bracket Adaptors are

Figure 22: Camera with Base Mount and

Axis Mount

mounting

Table of Contents