You can synchronizing the settings by using the Windows synchronization solution.
To access Windows synchronization solution, do the following:
1. Swipe in from the right edge of the screen to display the charms.
2. Tap Settings ➙ Change PC settings.
3. In the navigation panel, tap OneDrive ➙ Sync settings.
4. Configure settings as desired.
Using the Global Navigation Satellite System receiver
Your tablet might have a Global Navigation Satellite System (GNSS) receiver that enables you to pinpoint
your location down to the street level. Use location-based applications to find your current location, get
directions to your destination, and find other location-based information.
Note: By default, the GNSS receiver is enabled. For a longer battery life, disable the GNSS receiver when
not in use.
To disable the GNSS receiver, do the following:
1. Swipe in from the right edge of the screen to display the charms.
2. Tap Settings ➙ Change PC settings.
3. In the navigation panel, tap Network ➙ Airplane mode.
4. In the GNSS or GPS section, slide the control to the left to disable the GNSS receiver.
Turning off the tablet
To turn of the tablet, do one of the following:
• Go to the Start screen by tapping the Windows Start-screen control, click the power icon in the top-right
corner of the screen, then click Shut down.
• Move your pointer to the top-right or bottom-right corner of the screen to display the charms. Then
click Settings ➙ Power ➙ Shut down.
Note: If your tablet is attached to a supported keyboard, you also can open the Settings charm by pressing
the settings key
.
.
Chapter 2
Using your tablet
29