Table of Contents
Advertisement
Changing the startup sequence
To change the startup sequence, do the following:
1. Tap Boot. The default boot list is displayed, showing the order in which devices will be started up. Even
devices that are not attached to or installed on your tablet are listed.
2. From the Boot submenu, tap the menu item to specify the startup sequence that runs when you turn on
the power.
3. Save the changes and restart the system.
The following table lists the Startup menu items.
Notes:
• Default values are in boldface.
• From each submenu, tap the default value to show selectable options and select a desired option.
• Some items are displayed on the menu only if the tablet supports the corresponding features.
Table 3. Startup menu items
Note: The items listed in the following table might not be the same as those in your ThinkPad Tablet Setup.
The items are subject to change.
Menu item
Startup Option
Boot
Restart menu
If you want to close the ThinkPad Tablet Setup program and restart the system, tap Restart from the
ThinkPad Tablet Setup main menu. The following items are displayed:
• Exit Saving Changes: Exit system setup and save the changes.
Submenu item
Option Key Display
Boot Device List F12 Option
Boot Order Lock
ATA HDD
USB HDD
USB CD
USB FDD
Network Adapter
Value
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• On
• Off
Chapter 7
Comments
If you select Off, the "To
interrupt normal startup,
press Enter." message is not
displayed during the POST.
Enable or disable boot
device menu.
Enable or disable boot order
lock.
Change the Boot order by
dragging and dropping the
icon.
Change the Boot order by
dragging and dropping the
icon.
Change the Boot order by
dragging and dropping the
icon.
Change the Boot order by
dragging and dropping the
icon.
Change the Boot order by
dragging and dropping the
icon.
.
Advanced configuration
85
Advertisement
Table of Contents
