Table of Contents
Advertisement
Chapter 7. Advanced configuration
If you need to update your system UEFI BIOS, install new device drivers, this information will help you handle
your tablet with proper care and keep it in top working shape.
•
"Installing device drivers" on page 77
•
"ThinkPad Tablet Setup" on page 77
•
"Using system management" on page 86
Installing device drivers
The device drivers are available at http://www.lenovo.com/ThinkPadDrivers. Choose your tablet product
name to view all the device drivers for your tablet.
Attention: Always go to http://www.lenovo.com/ThinkPadDrivers for the latest device drivers. Do not
download them from the Windows Update Web site.
ThinkPad Tablet Setup
Your tablet comes with the ThinkPad Tablet Setup program that enables you to view and configure various
setup parameters.
To start the ThinkPad Tablet Setup program, do one of the following:
Note: If you are required to enter the supervisor password, enter the correct password. You also can skip
the password prompt and start the ThinkPad Tablet Setup program. If you do not enter the password, you
cannot change the configurations that are protected by the supervisor password. For more information,
refer to "Using passwords" on page 69.
• Restart the tablet. When the ThinkPad logo screen is displayed, tap around To interrupt normal startup,
press Enter or tap here. Tap F1 on the screen to start the ThinkPad Tablet Setup program.
• To start the ThinkPad Tablet Setup program from the operating system, do the following:
1. Swipe in from the right edge of the screen to display the charms.
2. Tap Settings ➙ Change PC settings.
3. In the navigation panel, tap Update and recovery ➙ Recovery.
4. In the Advanced startup section, tap Restart now.
5. The tablet restarts and a menu is displayed. Tap Troubleshoot ➙ Advanced options ➙ UEFI
Firmware Settings ➙ Restart.
6. The tablet restarts and enters the ThinkPad Tablet Setup program.
Note: If you have set a supervisor password, the ThinkPad Tablet Setup program menu will be displayed
after you enter the password.
The ThinkPad Tablet Setup program includes the following menus:
• Main menu: View the system information and set the date and time for your tablet.
• Config menu: View and change the configurations of your tablet.
• Security menu: Set the supervisor password and configure other security features of your tablet.
• Startup menu: Change the tablet startup settings.
© Copyright Lenovo 2014, 2015
77
Advertisement
Table of Contents
