RayTek Rayst25 Autopro User Manual page 9

info@Raytek-Direct.com
Troubleshooting
Code Problem
– – – (on display) Target temperature is over or
under range
Low battery
Battery icon
Blank display Possible dead battery
Laser doesn't work (1) Low or dead battery
(2) Laser turned off
(3) Ambient temperature above
40°C (104°F)
ERR Possible damage by EMF
Action
Select target within specifications
Check and/or replace battery
Check and/or replace battery
(1) Replace battery
(2) Turn laser on
(3) Use in area with lower ambient
temperature
Contact your distributor
5
1.888.475.5235