Cisco SVP2000P User Manual page 30

Field name
Phone number
Destination
Port
Alias
Note: There are four types of aliases.
1) add: xxx, it means that you need dial xxx in front of phone number, which will reduce dialing number length.
2) all: xxx, it means that xxx will replace some phone number.
3) del: It means that phone will delete the number with length appointed.
4) Rep: It means that phone will replace the number with length and number appointed.
You can refer to the following examples of different alias application to know more how to use different aliases and this
dial rule.
Call Mode
Suffix
Delete Length
S T E P H E N T E C H N O L O G I E S C O . , L I M I T E D
T e l : + 8 6 7 5 5 8 9 3 5 2 6 0 6 / F a x : + 8 6 7 5 5 8 9 3 5 2 6 1 2 / E m a i l : S u p p o r t @ s t e p h e n - t e l e . c o m / U r l : w w w . s t e p h e n - t e l e . c o m
There are two types of matching conditions: one is full matching, the other is prefix matching.
In the Full matching, you need input your desired phone number in this blank, and then you
need dial the phone number to realize calling to what the phone number is mapped. In the
prefix matching, you need input your desired prefix number and T; then dial the prefix and a
phone number to realize calling to what your prefix number is mapped. The prefix number
supports at most 30 digits
Set Destination address. This is optional config item. If you want to set peer to peer call, please
input destination IP address or domain name. If you want to use this dial rule on SIP2 line, you
need input 255.255.255.255 or 0.0.0.2 in it.SIP3 into 0.0.0.3
Set the Signal port, the default is 5060 for SIP.
Set alias. This is optional config item. If you don't set Alias, it will show no alias.
Select different signal protocol, SIP or IAX2
Set suffix, this is optional config item. It will show no suffix if you don't set it.
Set delete length. This is optional config item. For example: if the delete length is 3, the phone
will delete the first 3 digits then send out the rest digits. You can refer to examples of different
alias application to know how to set delete length.
/ 5 / F , B u i l d i n g N O . 1 , T o n g X i n I n d u s t r y Z o n e , H e n g G a n g , L o n g G a n g , S h e n z h e n , G . D , C h i n a , 5 1 8 1 1 5
S V P 2 0 0 0 P P B u s i n e s s P O E I P P h o n e U s e r M a n u a l
DIAL PEER
explanation
- 3 0 -