Cisco SVP2000P User Manual page 22

Field name
DHCP Leased Table
Shows the DHCP Lease Table, the unit of Lease time is Minute.
Lease Table Name
Start IP
End IP
Netmask
Gateway
Lease Time
DNS
Select name of lease table, click the Delete button will delete the selected lease table from DHCP lease table.
DNS Relay
Notice:
1)The size of lease table can not be larger than the quantity of C network IP address. We recommend you to use the
default lease table and not modify it.
S T E P H E N T E C H N O L O G I E S C O . , L I M I T E D
T e l : + 8 6 7 5 5 8 9 3 5 2 6 0 6 / F a x : + 8 6 7 5 5 8 9 3 5 2 6 1 2 / E m a i l : S u p p o r t @ s t e p h e n - t e l e . c o m / U r l : w w w . s t e p h e n - t e l e . c o m
IP-MAC mapping table. If the LAN port of the phone connects to a device, this table will show
the IP and MAC address of this device.
Specify the name of the lease table
Set the start IP address of the lease table
Set the end IP address of the lease table, the network device connected to LAN port will get IP
address between Start IP and End IP by DHCP.
Set the Netmask of the lease table
Set the Gateway of the lease table
Set the Lease Time of the lease table
Set the default DNS server IP of the lease table; Click the Add button to submit and add this
lease table
Select DNS Relay, the default is enabled. Click the Apply button to become effective.
/ 5 / F , B u i l d i n g N O . 1 , T o n g X i n I n d u s t r y Z o n e , H e n g G a n g , L o n g G a n g , S h e n z h e n , G . D , C h i n a , 5 1 8 1 1 5
S V P 2 0 0 0 P P B u s i n e s s P O E I P P h o n e U s e r M a n u a l
DHCP SERVER
explanation
- 2 2 -