Reading A Document Larger Than The Document Board; Removing The Document Cover - Fujitsu M3093DE Operator's Manual

4.2.3 Reading a document larger than the document board

4 – 4
If the size of the document is larger than the document board, read the
document using the following procedure:
Open the document cover at an angle of about 80°, then slide the
cover to the direction of the arrow to remove it.
Place the document face down on the document bed.
Place the document cover over the document.
Instruct the scanner to start scanning from the host computer.
After the read operation, remove the document, replace the
document cover. Mount the document cover to the original
position, and close the document cover.
Document cover
Figure 4.2 Removing the document cover
NOTICE: Do not remove the document cover for any other purpose.
80°
Document bed