Saeco Syntia Service Manual page 17

SYNTIA
Indications
Service door open: Close it.
If the service door is opened while product is being dispensed, the appliance stops
dispensing and starts a 30 sec. countdown before cancelling the dispensing process.
30
The countdown can be stopped by closing the service door and operation will resume
from its stopping point.
Turn the hot water/steam valve knob to the correct position.
If the knob is turned (open) while product is being dispensed, the appliance stops
dispensing and starts a 30 sec. countdown before cancelling the dispensing process.
The countdown can be stopped by closing the knob and operation will resume from
30
its stopping point.
No coffee unit.
If the brewing unit is removed while product is being dispensed, the appliance stops
dispensing and starts a 30 sec. countdown before cancelling the dispensing process.
The countdown can be stopped by re-inserting the brewing unit and closing the
30
door; operation will resume from its stopping point.
No dregs drawer.
If the dregs drawer is removed while product is being dispensed, the appliance stops
dispensing and starts a 30 sec. countdown before cancelling the dispensing process.
The countdown can be stopped by re-inserting the dregs drawer and operation will
30
resume from its stopping point.
Empty the dregs drawer
Insert dregs drawer
Indications
OK
1) Pour the descaler into the
water tank
ESC
2) Open the hot water valve
3) Descaling in progress
4) Close the valve
5) Fill the tank with fresh water
Saeco International Group
Causes
Causes
DESCALING CYCLE
(press the Aroma/pre-ground coffee key for 5 sec)
03 BRIEF INSTRUCTIONS
Solutions
To reset the grounds counter, wait until
there are no dregs displayed in the
symbol (5 sec.)
When the counter is cleared there will be
no dregs displayed in the symbol
Solutions
6) Open the hot water valve
7) Rinsing in progress
8) Close the valve
9) Fill the tank with fresh
water
10) Press the key indicated
END
by the arrow
Page 3 / 07