Specifications - Saeco Syntia Service Manual

SYNTIA
2.1. Technical specifi cations
Power supply and output:
Temperature monitoring:
Safety system:
Coffee heat exchanger output:
Stainless steel
Gear motor:
Pump:
Overpressure valve:
Water fi lter:
Coffee grinder:
Hot water/steam valve
Automatic dosage
Power consumption:
Dimensions: W x H x D in mm:
Weight:
Water tank capacity:
Coffee container capacity
Dregs drawer capacity
Heat exchanger capacity:
Water circuit fi lling time:
Heating time:
Grinding time:
Saeco International Group
240 V~ 50 Hz 1400 W - 230 V~ 50/60 Hz 1400 W -
120 V~ 60 Hz 1500 W - 100 V~ 50/60 Hz 1300 W
Variable resistor sensor (NTC) - transmits the value to the
electronic P.C.B
2 manual reset or one-shot thermostats (175°C)
(230/120 V~) 1300 W – (100 V~) 1100W
for coffee, hot water and steam dispensing
33VC with 2 rotation directions; power supply 24VC
Ulka with reciprocating piston and 120°C cutout 48 W, 230V,
50 Hz, Type EP5 approx. 13-15 bar 120V, 60Hz 100V, 50/60 Hz
Opens at approx. 16-18 bar
In tank
Direct current motor with fl at ceramic grinders
Presblock
Dose adjustment controlled by the electronic system
During the heating phase - approx. 5.6 A
256x315x410
9 kg
1l.
200 gr. coffee beans
8
Approx. 10 cc
Approx. 15 seconds for fi rst fi lling cycle
Approx. 45 seconds.
Approx. 8-10 seconds.
02 TECHNICAL SPECIFICATIONS
Page / 04
01