Customer Menu And Digital Programming; Customer Menu And Focus Programming - Saeco Syntia Service Manual

SYNTIA
3.1. Customer and programming menu
Machine ready signals (GREEN)
Indications
Machine at correct temperature
- for coffee bean dispensing
- for hot water dispensing
Machine at correct temperature
- for pre-ground coffee dispensing
Machine dispensing steam
Machine dispensing hot water
Machine dispensing one coffee
Machine dispensing two coffees
MEMO
The machine is being programmed
with the coffee cup fi ll level
Saeco International Group
Causes
03 BRIEF INSTRUCTIONS
Solutions
Proceed with the dispensing process
Proceed with the dispensing process
Proceed with steam dispensing
Proceed with hot water dispensing
Wait for the dispensing process to end
(dispensing stops when you press the
key again)
Wait for the dispensing process to end
(dispensing stops when you press the
key again)
Stop dispensing as desired
Page 1 / 07