Saeco Syntia Service Manual page 18

SYNTIA
You can go to the programming menu only in "Stand-by" mode
Press the ON/OFF button to put the machine in Stand-by.
Stand-by.
MENU
When the machine is in Stand-by, press the button "
advancement between functions and memory
The buttons "
those on the page.
Coffee temperature:
+
ESC
This function allows the coffee dispensing temperature to be adjusted
MAX
MED
MIN
-
Timer (Stand-by):
+
ESC
180'
This function lets you adjust the time for switching to Stand-by after the last
60'
30'
dispensing.
15'
-
Contrast:
+
ESC
This function allows the display contrast to be adjusted for better viewing of
the messages.
-
Water hardness:
+
ESC
This function lets you adjust the water hardness so that machine maintenance
is managed better
-
"INTENZA" water fi lter
+
ESC
This function lets you manage the "INTENZA" water fi lter.
ON
OFF
RESET
-
Factory settings
+
ESC
This function allows the factory values to be reset
YES
NO
-
Saeco International Group
(commands and programming)
" and "
= very soft water
MENU
" let you change the value of the function amongst
=soft =hard
03 BRIEF INSTRUCTIONS
" to go to programming,
=very hard
Page 4 / 07