Customer And Programming Menu - Saeco Xsmall Plus Service Manual

XSMALL
3.1.

Customer and programming menu

Double coffee LED
Selector
- coffee
- hot water
- steam
Indications
Machine at correct temperature
Fixed
- for coffee dispensing
- for hot water dispensing
- for steam dispensing
Machine in pre-heating phase for coffee,
Blinks slowly
hot water and steam dispensing.
Machine overheated; the machine cannot
dispense coffee in this mode.
Blinks quickly
The machine is being programmed
Blinks slowly
with the
Machine dispensing coffee
Fixed
Saeco Int.
03 BRIEF INSTRUCTIONS
Small coffee (press twice
for double coffee)
21
17
Large coffee (press twice
for double coffee)
Causes
coffee cup fi ll level
Rev. 00 / Jul. 2008
Temperature LED
On/Off
18
Alarm LED
Solutions
The water must be drained out
into a recipient by turning the se-
lector clockwise to the "
until the green correct temperature
LED remains lit in a fi xed manner.
The fl ow of water dispensed should
then be stopped.
Page 1 / 3
" point,