Busy (Address 18); Read Her (Address 19) - Qualstar 1260 User Manual

500250 K
• YES - If the final retry was successful or resulted in a CER, the drive reports a
Recoverable Error. Otherwise, the drive reports a Media Error.
II
PARAMETER
I
REPORTED STATUS
I
TUS
I
SETTING IF LAST RETRY WAS IF LAST RETRY
SUCCESSFULL
I
RESULTED IN A CER
I
REPORTED STA:
ERROR Good Completion Media Error
LAST Good Completion Recoverable Error
NO Good Completion Good Completion
RETRY Recoverable Error Media Error
YES Recoverable Error Recoverable Error
Table 7-5
Summary of the Rewrite CER Parameter
7.12.24 Busy (Address 18)
o
= NOT READY, 1 = BUSY; DEFAULT = 0
This parameter determines how the tape drive responds when it receives a tape mo-
tion command while the tape is rewinding, loading, or security erasing a tape.
• NOT READY - The tape drive sets the Check Condition bit in the Completion
Status byte, and a sense key of Not Ready.
• BUSY - The tape drive sets the Busy bit in the Completion Status byte.
7.12.25 Read HER (Address 19)
o
= REPORT, 1 = IGNORE; DEFAULT = 0
The Read HER parameter allows you to inhibit the reporting of hard errors and to dis-
able retries during read operations.
• REPORT - Report hard errors which occur during read operations as media er-
rors.
· IGNORE - Do not report hard errors which occur during read operations and
do not perform retries.
Supplemental SCSI Drive Information
7-29