Qualstar 1260 User Manual page 2

Caution!
ii
Copyright Notice
Information contained in this document is copyrighted by Qualstar Corporation. It is
intended for use by Qualstar's customers and prospective customers to evaluate, inte-
grate, operate and maintain Qualstar products. Customers and prospective customers
may reproduce this document as needed for these uses. Reproduction in whole or in
part for any other use or by any other party is prohibited without prior written permis-
sion from Qualstar Corporation.
Every effort has been made to keep the information contained in this document cur-
rent and accurate as of the date of publication or revision. However, no guarantee is
given or implied that the document is error-free or that it is accurate with regard to
any specification. Qualstar reserves the right to modify product designs and specifica-
tions without notice.
• Qualstar® is a registered trademark of Qualstar Corporation.
• Cipher® is a registered trademark of Archive Corporation.
• Pertec® is a registered trademark ofDDC Pertec ..
•
IB~
is a registered trademark of International Business Machines, Incorpo-
rated.
References contained in this manual to DIP switch settings, jumper loca-
tions, primary voltages and other options are for reference only. Access
to the interior of this equipment is restricted to dealers and qualified
service technicians, and only in accordance with published service manu-
als and bulletins.
For service information or help with installation,
please write or call Qualstar Customer Support:
Qualstar Corporation
6709 Independence Avenue
Canoga Park, CA 91303
FAX: (818) 592-0116
Phone: (818) 592-0061
500250K