Inserting The Label Cassette - Dymo LabelManager Quick Start Manual

Inserting the Label Cassette

Your label maker uses DYMO D1
label cassettes.
To insert the label cassette
Press and pull to open the
1
side cover of the label maker.
Make sure the tape and ribbon
2
are taut across the mouth of the
cassette and that the tape
passes between the label
guides. See Figure 3.
If necessary, turn the ribbon
rewind spool clockwise to
tighten the ribbon.
Insert the cassette and press
3
firmly until the cassette clicks
into place. See Figure 4.
Close the side cover of the
4
label maker.
4
Press
and pull
Ribbon rewind
spool
Label guides
Figure 3
Click!
Figure 4