Visit www.dymo.com for information on obtaining tapes and accessories for your labelmaker. To connect the power adapter 1. Plug the power adapter into the power...
LM150 WEUdef.qxd 23-09-2003 16:07 Pagina 4 2. Set the cassette switch for the size of the tape Selecting Units of Measure cassette that you are inserting. See Figure 3. You can choose to show measurements in A notch in the cassette will fit over the inches or millimeters.
LM150 WEUdef.qxd 23-09-2003 16:07 Pagina 5 In addition, feature indicators appear on the Backspace display to let you know when a feature is The Backspace key removes the character to selected. See Figure 6. the left of the cursor. Shift-Backspace clears all the label text and formatting.
LM150 WEUdef.qxd 23-09-2003 16:07 Pagina 6 Only one style can be used at a time. Styles Using Symbols and can be used with all alphanumeric characters Special Characters and most symbols. See “Adding Symbols” for Symbols and other special characters can be more information on printing symbols.
LM150 WEUdef.qxd 23-09-2003 16:07 Pagina 7 Adding International Characters You can specify a fixed length for a label in The labelmaker supports the extended Latin 2 mm increments from 40 mm to 400 mm. character set using RACE technology. Similar The preset fixed length is 40 m.
Wipe print head clean using the cleaning tool 2. Use the arrow keys to select Set Contrast located inside the tape compartment lid. and press OK. DYMO D1 label cassettes 3. Use the arrow keys to select one of the five contrast settings and press OK. Width: 12mm (1/8")
Do one of the following: • Adjust the fixed-length label setting appropriately, • Select a narrower font size. If you still need assistance, contact DYMO Customer Support for your country. The Warranty booklet includes a list of contact numbers for each country.