Grandstream Networks GXP1610 Administration Manual page 24

Route
Support SIP Instance
ID
SUBSCRIBE for MWI
SUBSCRIBE for
Registration
Enable 100rel
Caller ID Display
Use Privacy Header
Use P-Preferred-
Identity Header
Account x -> SIP Settings -> Advanced Features
Line-seize Timeout
Eventlist BLF URI
Conference URI
Music On Hold URI
BLF Call-pickup Prefix
PUBLISH for Presence
Special Feature
Broadsoft Call Center
Hoteling Event
Call Center Status
Feature Key
Extension to notify the SIP server that the device is behind a NAT/Firewall.
Defines whether SIP Instance ID is supported or not. The default setting is
"Yes".
When set to "Yes", a SUBSCRIBE for Message Waiting Indication will be sent
periodically. The phone supports synchronized and non-synchronized MWI.
The default setting is "No".
When set to "Yes", a SUBSCRIBE for Registration will be sent out
periodically. The default setting is "No".
The use of the PRACK (Provisional Acknowledgment) method enables
reliability to SIP provisional responses (1xx series). This is very important in
order to support PSTN internetworking. To invoke a reliable provisional
response, the 100rel tag is appended to the value of the required header of
the initial signaling messages.
When set to "Auto", the phone will look for the caller ID in the order of P-
Asserted Identity Header, Remote-Party-ID Header and From Header in the
incoming SIP INVITE. When set to "Disabled", all incoming calls are displayed
with "Unavailable". When set to "From Header", the phone will display the
caller ID based on the From Header in the incoming SIP INVITE. The default
setting is "Auto".
Controls whether the Privacy Header will present in the SIP INVITE message
or not. The default setting is "default": the Privacy Header will show in INVITE
unless "Huawei IMS" special feature is on. If set to "Yes", the Privacy Header
will always show in INVITE. If set to "No", the Privacy Header will not show in
INVITE.
Controls whether the P-Preferred-Identity Header will present in the SIP
INVITE message or not. The default setting is "default": the P-Preferred-
Identity Header will show in INVITE unless "Huawei IMS" special feature is
on.
If set to "Yes", the P-Preferred-Identity Header will always show in INVITE.
If set to "No", the P-Preferred-Identity Header will not show in INVITE.
Defines the interval (in seconds) before the line can be sized when Shared
Line is used. The valid range is 15 to 60.
Configure Eventlist BLF URI to monitor the extensions on Multi Purpose Keys.
Configures the conference URI when using Broadsoft N-way calling feature.
Music On Hold URI to call when a call is on hold if server supports it
Configures the prefix prepended to the BLF extension when the phone picks
up a call with BLF key.
Enables Presence feature on the phone.
Specifies the server type for special requirements.
Default setting is "Disabled". When set to "Enabled", a soft key "BSCCenter"
is displayed on LCD. User can access different Broadsoft Call Center agent
features via this softkey. Please note that "Feature Key Synchronization" will
be enabled regardless of this setting.
Broadsoft Hoteling event feature. Default setting is "No". With "Hoteling Event"
enabled, user can access the Hoteling feature option by pressing the
"BSCCenter" softkey.
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain
call center status. The default setting is "No".
This feature is used for Broadsoft call feature synchronization. When it's
GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 23 of 48