Black Vertical Belts Or Stripes (Figure 6-3 D ) - Oki OKIPAGE 10ex Maintenance Manual

4
Black vertical belts or stripes
• Perform the cleaning page function (see Section 5.2.2).
• Has the problem been solved?
• Yes
• No Replace the image drum cartridge.
• Has the problem been solved?
• Yes
• Clean the LED lens array of the LED head.
• Has the problem been solved?
• Yes
• No Replace the LED head.
• Has the problem been solved?
• Yes
• No Replace the main control board or power supply/sensor board.
40718401TH Rev.5
End.
End
Note: After replacing the image drum cartridge, set the printer to the user mainte-
nance mode by turning the power on while pressing the MENU key, and reset
the drum counter (see Printer Handbook).
End.
End
Note: After replacing the LED head, set the printer to the engine maintenance mode
by turning the power on while pressing the FORM FEED and ENTER keys. Set
the LED head drive time (see 4.2).
111 /