Oki OKIPAGE 10ex Maintenance Manual page 153

• The following items are excluded:
Head drive time setting
Fine adjustment of printing start position
Standard tray paper feed amount setting
• Transition to the operation mode occurs upon completion of resetting.
• Press the MENU key to update each category.
The operation returns to the first category after updating the last category, in a loop.
(6) System Maintenance Mode Menu System
LCD display
Press the
MENU key.
40718401TH Rev.5
SYS MNT
Press the
MENU key.
PAGE CNT
nnnnnn
Press the
Press the
MENU key.
or key.
PAGE PRT
DISABLE *
Press the
MENU key.
Press the
CONT PRT ENTER key.
Press the
MENU key.
Press the
ENTER key.
LOOPTEST
Press the
MENU key. Press the
ENTER key.
EEPROM
RESET
Press the
MENU key.
Press the
or key.
SIDM
ENABLE *
Press the
ON LINE key.
INITIAL-
IZING
ON LINE
XXX
Writing into the EEPROM is performed
after pressing the ENTER key. Press
PAGE PRT
the ON LINE key if you wish to get
ENABLE
out of this mode.
Press the
ON LINE key.
CONT PRT
PRINTING
LOOPTEST
nnnnnn
After the completion
of processing
EEPROM
RESET'NG
XXX: AUTO, PCL, PPR, FX, AdobePS, HEX
* Do not change the default setting.
Switches enable/disable of SIDM
ENABLE *
(IBM/EPSON) emulation. When
DISABLE
DISABLE is selected, IBMPPR and
EPSONFX will not appear.
CONT PRT
CANCELED
LOOP ERR
nnnnnn
ON-LINE
XXX
153 /