Oki OKIPAGE 10ex Maintenance Manual page 140

8) Interface Parameter Setting
The following settings are possible by pressing the ENTER key, after selecting the display
contents of the LCD of the operator panel by using the
Settings are retained even when the printer power is turned off.
By pressing the ON LINE key, menu setting mode is completed and the printer returns to on-
line state.
Ready
Keep the MENU key down for more than 2 seconds and bring the printer into menu setting
mode (level 2). Next, press the MENU key 10 times.
Ready
Ready
40718401TH Rev.5
OFF-LINE
XXX
XXX : PCL, AUTO, HEX DUMP, PRR or FX
"RS232C SERIAL" is displayed on the LCD.
RS232C
SERIAL
Item
Contents of Display
DTR HI
DTR LO
FLOW CTL
XONXOFF
Contents
RBSTXON
Factory Setting: DTR HI
and keys.
Press the ENTER key.
Flow CTL
Function
SPACE-READY
MARK-READY
Sending at intervals of 1 sec.
140 /