Wait For 'F1' If Error [Disabled]; Option Rom Messages [Force Bios]; Csm (Compatibility Support Module) - Aaeon IMBA-H61A User Manual

3.6.4

Wait for 'F1' If Error [Disabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed
when error occurs. Configuration options: [Disabled] [Enabled]
3.6.5

Option ROM Messages [Force BIOS]

[Force BIOS]
[Keep Current] The third-party ROM messages will be displayed only if the third-
3.6.6

CSM (Compatibility Support Module)

This option controls whether or not CSM (Compatibility Support Module) will be
launched.
Launch CSM [Enabled]
[Enabled]
[Disabled]
The following four items appear only when you set Launch CSM to [Enabled].
Boot Device Control [UEFI and Legacy OpRom]
Configuration option: [UEFI and Legacy OpRom] [Legacy OpRom only] [UEFI only]
Boot from Network Devices [Legacy OpRom first]
Configuration option: [Legacy OpRom first] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy OpRom first]
Configuration option: [Both, Legacy OpRom first] [Both, UEFI first] [Legacy OpRom
first] [UEFI driver first] [Ignore]
Boot from PCIe/PCI Expansion Devices [Legacy OpRom first]
Configuration option: [Legacy OpRom first] [UEFI driver first]
3-16
The third-party ROM messages will be forced to display during the
boot sequence.
party manufacturer had set the add-on device to do so.
For better compatibility, enable the CSM to fully support the non-
UEFI driver add-on devices, or the Windows UEFI mode.
Disable the CSM to fully support the Windows Security Update and
Security Boot.
IMBA-H61A