Bootup Numlock State [On]; Wait For 'F1' If Error [Disabled]; Option Rom Messages [Force Bios]; Int19 Trap Response [Postponed] - Aaeon EMB-Q77A Owner's Manual

PS/2 Keyboard and Mouse Support [Auto]
[Auto]
[Disabled]
[Full Initialization]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
3.5.2

Bootup NumLock State [On]

[On]
[Off]
3.5.3

Wait for 'F1' If Error [Disabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed
when error occurs. Configuration options: [Disabled] [Enabled]
3.5.4

Option ROM Messages [Force BIOS]

[Force BIOS]
[Keep Current]
3.5.5

INT19 Trap Response [Postponed]

[Immediate]
[Postponed]
Chapter 3: BIOS setup
Automatic configuration.
Disables PS/2 keyboard and mouse support during
POST.
PS/2 keyboard and mouse support are enabled during
POST.
The BIOS skips over the Network Stack Driver and
tries to boot from the next device.
Allows the BIOS to boot from the Network Stack Driver.
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
The third-party ROM messages will be forced to
display during the boot sequence.
The third-party ROM messages will be displayed only if
the third-party manufacturer had set the add-on device
to do so.
Execute INT19 Trap immediately.
Execute INT19 Trap during legacy boot.
3-19