Download Print this page

SCAN Andersen 4-5 Instructions For Installation And Use

Iron wood burning stoves

Hide thumbs Also See for Andersen 4-5:

Download this manual See also: Manual

I N S T R U C T I O N S

F O R

I N S T A L L A T I O N

A N D

U S E

Scan

Andersen 4-5

Approved according to

EN 13240

This manual is accompanied by a

pamphlet with General Iinstructions for

Installation.

Edition 15.11.07 - GB

Page 1 F O R I N S T A L L A T I O N A N D U S E Scan Andersen 4-5 Approved according to EN 13240 This manual is accompanied by a pamphlet with General Iinstructions for Installation.
Page 2: Clean Combustion
Mounting of the heat shie- You have to mount separate heat-shields under the SCAN Andersen 4-5. Place the stove care- fully on the back and mount the heat- shields as shown on the sketch. Handle Your stove is equipped with a loose handle, which is practical if you have small children.
Page 3 Scan Andersen 4-5 Mounting of the side covering: Base: Convection plates: 1 Ashtray. When you open the door, you have access to the Soap stones: ashtray, which is placed below the combustion chamber. Attention! Be careful when you empty ashes from the stove.
Page 4: Warranty Conditions
Warranty conditions All SCAN wood-burning stoves and inserts are made of first-class material and are subject to a strict quality control before they leave the factory. However, if an error should occur, we back all SCAN wood-burning stoves and inserts with an extensive, five-year limited warranty.