Model: Uty-Rnn  M - Fujitsu AU*G07LVLA Technical Manual

13-3-1. MODEL: UTY-RNN
„ „
SWITCHING SELECTION OF FUNCTION SETTING MODE
2) To activate the function setting mode, hold down the three buttons "SET TEMP. V", "SET
TEMP. Λ" and "FAN" at the same time for 5 seconds or longer.
„ „
BUTTON NAME AND FUNCTION
● During address setting mode, indoor unit will reject any operation command from the remote
controller.
Function number
Refer to FUNCTION DETAILS
Remote controller address
Fixed to 00.
Set Time "<" and ">" button
Switches the function number.
 M
Function setting mode initial display
- (01-165) -
Setting number
Refer to FUNCTION DETAILS
Λ
SET TEMP. "V" and " " button
Switches the setting number.
TIMER SET button
Transmits function setting