Function Settings; Indoor Unit (Setting By Jumper Wire); Switch Position; Jumper Wire Setting - Fujitsu AU*G07LVLA Technical Manual

13.

FUNCTION SETTINGS

13-1.

INDOOR UNIT (setting by jumper wire)

Note: This function is Slim Duct type only.
„ „

SWITCH POSITION

z „
Slim Duct type
„ „

JUMPER WIRE SETTING

z „
Drainage function setting (JM1)
JM1
Connect
u
Disconnect
z „
Auto louver grille setting (JM2)
When Auto louver grille kit (optional parts) is attached, set the Auto louver grille setting to "Enable".
JM2
Connect
u
Disconnect
z „
Fan delay setting (JM3)
JM3
Connect
u
Disconnect
JM3
JM2
JM1
(u...Factory setting)
Drainage function
Enable
Disable
(u...Factory setting)
Auto louver grille setting
Disable
Enable
(u...Factory setting)
Fan delay
Disable
Enable
- (01-147) -