Fujitsu AU*G07LVLA Technical Manual page 160

„ „
FUNCTION SETTING
(4) Press the "TEMP.
Press the "10°C HEAT" button to switch between left and right digits.
Change digit
(5) Press the "POWERFUL" button to proceed
to the setting number.
(Press the "POWERFUL" button again to
return to the function number selection.)
(7) Press the "MODE" button once to send the
function mode information.
„ „
FUNCTION DETAILS
Refer to 13-5. FUNCTION DETAILS
" or "TEMP. " buttons to select the function number.
Pi Pi
- (01-156) -
Change digit
(6) Press the "TEMP.
buttons to select the setting number.
Press the "10°C HEAT" button to switch
between left and right digits.
/ " button once to fix the
(8) Press the "
function setting.
A beeping noise will be heard if the
command is accepted.
*Wrong code: No Response
Note: Please push the "
after pushing the "MODE" button.
" or the "TEMP. "
Change digit
Pi Pi
/ " button within 30 seconds