Audio Problems; Printer Problems; Mouse And Keyboard Problems; Modem Problems - HP ML110 G2 User Manual

Audio problems

Action: Be sure the server speaker is connected. Refer to the server documentation.

Printer problems

Printer does not print
Action:
Be sure the printer is powered up and online.
1.
Be sure no loose connections (on page 41) exist.
2.
Be sure the correct printer drivers are installed.
3.
Printer output is garbled
Action: Be sure the correct printer drivers are installed.

Mouse and keyboard problems

Action:
Be sure no loose connections (on page 41) exist. If a KVM switching device is in use, be sure the
1.
server is properly connected to the switch.
•
For rack-mounted servers, check the cables to the switch box and be sure the switch is correctly
set for the server.
•
For tower model servers, check the cable connection from the input device to the server.
If a KVM switching device is in use, be sure all cables and connectors are the proper length and are
2.
supported by the switch. Refer to the switch documentation.
Be sure the current drivers for the operating system are installed.
3.
Be sure the device driver is not corrupted by replacing the driver.
4.
Restart the system and check whether the input device functions correctly after the server restarts.
5.
Replace the device with a known working equivalent device (another similar mouse or keyboard).
6.
•
If the problem still occurs with the new mouse or keyboard, the connector port on the system I/O
board is defective. Replace the board.
•
If the problem no longer occurs, the original input device is defective. Replace the device.
Be sure the keyboard or mouse is connected to the correct port. Determine whether the keyboard
7.
lights flash at POST or the NumLock LED illuminates. If not, change port connections.
Be sure the keyboard or mouse is clean.
8.

Modem problems

No dial tone exists
Action:
Be sure the cables are plugged in as specified in the modem documentation.
1.
Connect a working telephone directly to the wall jack, and then test the line for a dial tone.
2.
If no dial tone is detected, the phone line is not working. Contact the local telephone company and
3.
arrange to correct the problem.
Troubleshooting 66