Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 2027GR-
TRFH/2027GR-TRFHT. Installation and maintenance should be performed by
experienced technicians only.
The 2027GR-TRFH/2027GR-TRFHT is based on the SC218GTS-R1800BP 2U
rackmount server chassis and the Super X9DRG-HF/X9DRG-HTF serverboard.
Please refer to our web site for an up-to-date list of supported operating systems,
processors and memory. See Chapter 1 for a list of differences between the server
models.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X9DRG-HF/X9DRG-
HTF serverboard and the SC218GTS-R1800BP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the system into a rack and
check out the server confi guration prior to powering up the system. If your server
was ordered without the processor and memory components, this chapter will refer
you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview of
safety precautions that should be followed when installing and servicing the system.
Preface
iii
Preface
Advertisement
Table of Contents
