Gpu And Coprocessor Subsystem - Supero SUPERSERVER 2027GR-TRFHT User Manual

S S
UPER ERVER 2027GR-TRFH/2027GR-TRFHT User's Manual
1-4

GPU and Coprocessor Subsystem

The 2027GR-TRFH/2027GR-TRFHT server represents one of Supermicro's mas-
sively parallel processing GPU servers. Six NVIDIA® Fermi™ and Kepler K20 GPUs
place this system at the forefront of today's GPU computing solutions.
Refer to the NVIDIA web site (www.nvidia.com) for details on Fermi and Kepler
GPUs.
Notes
The GPUs process complex image calculations and then route the data out through
the VGA port on the serverboard.
The 2027GR-TRFH/2027GR-TRFHT can support six standard size (double-width)
GPUs.
The NVIDIA M2075 and M2090 GPUs, which come with a passive heatsink at-
tached, have been tested for use with this system. Any combination of these cards
(up to a total of six) may have come bundled with the system.
The GPUs can be bundled with the system as follows:
2027GR-TRFH/2027GR-TRFHT-FM609: includes six NVIDIA Fermi M2090 GPUs.
2027GR-TRFH/2027GR-TRFHT-FM675: includes six NVIDIA Fermi M2075 GPUs
NVIDIA® Kepler™ K20 GPUs require their own mounting brackets for installation
(MCP-240-21810-0N).
For more information on how to install the GPU and coprocessor bracket please
refer to the GPU and Coprocessor Installation section on page 6-11.
Power Notes
To provide power for the GPU cards, connect the GPU power cable from each of the
GPUs to JPW3, 4, 6 and 7,8 and 11 on the serverboard (one cable for each card).
1-4