Operation Manual
Checking Water Temperature
To check the current water temperature in the hot water tank, remove and re-install the waste
bin. The machine will display the water temperature in the lower center of the screen during re-
initialization.
Initial Adjustments
Change PINs for the Operator and Administrator
To prevent unauthorized access to the Eccellenza Touch programming, we highly recommend
that you change the default PIN (Personal Identification Numbers) for both the Operator and
Administrator.
Both PIN numbers can be changed in the 'Security' menu
Setting the Date and Time
Enter the set up of the machine and set the correct date and time. This is extremely useful when
setting the Energy Savings features, tracking data that the equipment has collected and when
reports are sent to the operator of the equipment.
The date and time settings are found in the 'Regional Settings' menu
Water Levels
The Eccellenza Touch is factory preset to only dispense 8-oz, 10-oz, and 12-oz cups sizes. The
water levels can be fine-tuned in the 'Setup' menu
Gram Throws
You will also need to calibrate the gram throws for the coffee blends and powder types you will
be using in the equipment. Calibration ensures that the equipment delivers the best tasting
beverage possible.
Product settings are adjusted in the 'Setup' menu
Beverages
The Eccellenza Touch is preset with all of the beverages and beverage options (such as cup sizes
and strengths) enabled.
Beverage options are set in the 'Setup' menu
Notifications
The Eccellenza Touch can be configured to provide notifications about usage and consumption,
counters, faults and messages, etc.
To configure the 'Notifications' feature, go to the 'Network' menu
18
(see page
70).
(see page
(see page
47).
(see page
47).
(see page
47).
(see page
33).
41).
VKI Publication #100308-003