Routine Maintenance - Unox XFT LineMiss Instruction Manual

Routine maintenance

Any routine maintenance procedure must be performed:
- after disconnecting the appliance from the power and water supplies;
Clean the oven cavity daily to maintain proper levels of hygiene and to keep the stainless steel inside the oven
External steel structures, oven cavity seal
Plastic surfaces and control panels
Use only a very soft cleaning cloth and a small amount of detergent for cleaning delicate surfaces.
English
When cleaning any component or accessory NEVER
use:
- abrasive or powder detergents;
these substances also when cleaning the appliance
substructure;
- hot water sprays or high pressure steam jets.
Wait for the surfaces to cool off.
Use only a soft cleaning cloth dampened with a little
soap and water. Rinse and dry completely.
In alternative, only use detergents recommended by
UNOX; other products may cause damage thereby
invalidating the guarantee. Read the instructions pro-
vided by the detergent producer for their use.
-