Anchoring; Anchoring On Unox Substructures - Unox XFT LineMiss Instruction Manual

Starter Kit
art. ED1271A0

Anchoring

Before anchoring on a UNOX substructure or on one of your own, always check that the sub-
levelled by adjusting the feet. Beware - do not completely unscrew the feet.

Anchoring on UNOX substructures

The stacking kit is available for anchoring an oven on top of a UNOX prover. Follow the instructions on the steam
condenser packaging for their assembly.
For anchoring on an open stand please see the figure below.
Use only the UNOX wheel kits to move
proovers or open stands by following the
instructions on the kits packaging.
1
English
For safety reasons, the last tray should
NEVER be placed at a height greater
If necessary to do so, it is mandatory to
post the sticker contained in the "Starter Kit" at
the height shown in the figure.
2
3
4
x4