Strobe Use And Compatibility; Strobe Compatibility; Ikelite Housing Conversion Circuitry - Ikelite 6951.07 Instruction Manual

Underwater ttl housing

Table of Contents

Strobe Use and Compatibility

AF35 ........................no

DS50........................yes, above serial number 70,000

DS51........................yes

DS125......................yes, above serial number 5000

DS160, DS161 ........yes

DS200......................yes, above serial number 7163

Non-Ikelite ..............yes, manual flash exposure only

This small compact housing has Ikelite designed and patented

Conversion Circuitry built right in. The Conversion Circuitry provides real

TTL flash exposure when used with Ikelite DS series strobes. The

Circuitry is automatically activated once a DS series strobe is attached

to the housing and turned on. Once attached, turn the strobe on first

before turning on the camera.

Non-Ikelite strobes can be used in manual settings only. The circuitry will

be inactive and provide only manual flash.

Attaching a Sync Cord to the Housing -

The Housing Bulkhead is designed to accept sync cords with Ikelite 5

pin connector fittings.

1. Lightly lubricate the Sync Cord O-ring. Use ONLY Ikelite lubricant

(supplied with housing).

2. Remove Bulkhead Cap from Housing Bulkhead.

(MIL Housing)

Diagram F, Page 16

Table of Contents