Problem
Water enters the
housing
Pictures are too blue
or too green
Customer Support
Please read the troubleshooting section of this instruction manual before
contacting Ikelite Customer Support.
Ikelite Underwater Systems
Service Department
50 West 33rd St.
Indianapolis, IN 46208 USA
Email: ikelite@ikelite.com
Phone: 317-923-4523
26
Solution
- Remove, clean and properly lubricate the main
o-ring.
- Look for hair, dirt, or foreign debris crossing the
o-ring seal.
- Reassemble the housing without a camera
installed and pressure test or take diving.
- Return housing to Ikelite for evaluation.
- Add an optional color correcting filter to the
camera lens.
- Use custom (manual) white balance. Reset for
each working depth or when attaching a color
correcting filter to the camera lens.
- Add an external strobe.
- Move in closer to your subject when taking a
picture.