The Operator Interface; Interface For User And Maintenance Levels - Faraday MPC-6000 Programming Manual

The Operator Interface

Interface for User and Maintenance Levels

The operator interface for configuring and programming the MPC 6000/7000 uses
the 4 line by 20 character LCD display, the M1 through M4 buttons on the left and
right of the display and sixteen push buttons at the bottom of the interface. User
Level and Maintenance Level utilize the LCD display and the four buttons (two on
each side of the display) to navigate and alter the basic operation of the panel. The
display will show messages in the four corners of the display that will be adjacent to
the four buttons M1 through M4. The message on the display adjacent to the button
indicates the action that will occur when the button is pressed. Therefore pressing
M1 will cause the function labeled as "Menu 1" to be pressed.
M1
M2
For example, in the following figure, menu item 1 (Lamp Test) is described as having
an Action of 'Run Lamp Test'. If the button next to Lamp Test is depressed, Lamp
Test will be performed. Menu item 2 (View History) will cause the first event in the
event history to be displayed on the screen.
Action: Run Lamp
Will display panel
History
M P C
Menu 1
Menu 2
Lamp Test
View
History
6 0 0 0 / 7 0 0 0 P R O G R A M M I N G
M3
Menu 3
Menu 4
M4
Esc
More
3
M A N U A L
Returns to the top of
the list or to the level
up
go to the next screen