Faraday MPC-6000 Programming Manual page 16

M P C 6 0 0 0 / 7 0 0 0
Monitor Modules with relay and single input
Parameter
Label
Led off
Input Usage
Input Group
Network Group
Output Type
Output Zone
Intelligent LEDs
Parameter
Label
Output Type
Output Zone
NACs
Parameter
Notification
Device Type
Output Type
Output Zone
System Parameter
Parameter
Label
Drill Enable
Auto Silence Timer
Alarm Silence Inhibit
Panel Reset Inhibit
Auto Alarm silence
Trouble Reminder
NAC sound time
Quick test exit
City Tie Activation
Global Commands
Printer ESC
•
Presence of LCD Annunciators are detected and programmed as installed when
detected.
P R O G R A M M I N G M A N U A L
Generic label identifying the detector by loop number and address.
LED will be defaulted to ON.
Input usage will be set to alarm.
Inputs will be set to input group 241.
This will not be set and will need to be set manually. (Future use)
Will be set to non-silenceable.
Will be set to 1.
Generic label identifying the detector by loop number and address.
Will be set to non-silenceable.
Will be set to 1.
Set to Audible.
Will be set to silenceable.
Will be set to 1.
Set to "FARADAY AUTO Prgrmd"
ON
Off
Off
Off
Off
12 hours
5 seconds
30 minutes
Not changed
Not changed
Not changed
Description
Description
Description
Description
12