Clearing The History; Printing The History; Printing The Sensitivity Levels; Editing The System Label - Faraday MPC-6000 Programming Manual

M P C 6 0 0 0 / 7 0 0 0

Clearing the History

The panel can store the last 2000 events in the event history. The information
displayed includes the date and time, the type of event (TRB, ALM, SUP, etc.), the
device reporting the event and the event reported. This event history may be cleared
using the following steps.
Press "More" three The display will
times, then press then request a
"Clear History". yes or no
confirmation.

Printing the History

The panel can store the last 2000 events in the event history. The information
displayed includes the date and time, the type of event (TRB, ALM, SUP, etc.), the
device reporting the event and the event reported. This event history may be printed
using the following steps.
Press "More", then The display will
press "Print Hist.". show the "Print
Fwd" and "Print
Reverse" options.

Printing the Sensitivity Levels

The sensitivity levels of all of the detectors in the system may be printed. Follow the
steps below:
Press "More", then The display will
press "Print indicate that the
Sensor Levels". sensor levels are
being printed.

Editing the System Label

The system label may be changed as follows:
Press "More" Press "System".
twice, then press
"Edit Labels".

Editing the Device Labels

The device labels may be changed as follows:
Press "More" Press "Device".
twice, then press
"Edit Labels".
P R O G R A M M I N G M A N U A L
Press "Yes" to clear the event
history. The display will flash a
short message to indicate the
history has been cleared.
Select the direction of printing
that is desired. The display will
show a message that history is
being printed.
The display will
show the system
label.
Enter the Device
and loop address.
Then press Dnxt.
Use the keypad
keys to change the
system label text.
Pressing Bsav will
save the changes.
The display will
show the label for
the device at this
address.
20
Use the keypad
keys to change the
system label text.
Pressing Bsav will
save the changes.