Faraday MPC-6000 Programming Manual page 27

Below are the different parameters that may be set for each of the different devices:
FireSmart
Smoke
Detector
Parameter 8713
Label X
Application X
Sensitivity When app
off
ROR -
Led off X
Pre-alarm When app
off
Verification When app
off
Alarm X
Waterflow -
Sil. Waterflow -
Trouble -
Supervisory X
Non-fire -
Panel reset -
Alarm silence -
Acknowledge -
Test -
Manual Pull -
*Available only for first input usage.
NOTE: When programming requires yes or no, press 1 for YES and 0 for NO.
The following table provides a description of the parameters that may be set for each
device.
Parameter
Label Each device may have a forty character label assigned to it to describe the input. This label
will be displayed when the input becomes active.
Application The FireSmart detectors have internal algorithms that may be set for different environments.
A setting of "none" turns off the algorithms and allows the detector sensitivity to be set
manually and verification to be selected.
Sensitivity This sets the level of smoke that will cause the device to generate an alarm. This is only
appropriate for smoke detectors.
ROR Rate of rise thermal alarm. This is used for the FireSmart detector and the thermal detector
when the temperature rises at a rate of xx degrees/minute.
Led off Used to disable the LED on the device so that it does not indicate polling. It will still flash red
for alarm.
Pre-alarm Selected when an early warning of a fire alarm is required.
Verification This is selected to cause the device to go through the UL defined verification cycle to
eliminate false alarms.
M P C
Thermal Photo
Detector Smoke station
Detector
8712 8710 8700-S
8700-D
8700-M
X X
- -
- X
X -
X X
- X
- X
X X
- -
- -
- -
- X
- -
- -
- -
- -
- -
- -
23
6 0 0 0 / 7 0 0 0 P R O G R A M M I N G
Loop Devices
Pull Single Dual
input input
monitor monitor
module module
8701 8703
8702
X X X
- -
- -
- -
- X X
- -
- -
X X X
- X X
- X X
- X X
- X X
- X X
- X X
- X X
- X X
- X X*
- -
Description
M A N U A L
Single Conven-
input tional
monitor Zone
module module
with relay
8704 8705
X X
- - -
- - -
- - -
X X
- - -
- - X
X X
X X
X X
X -
X X
X -
X -
X -
X -
X -
- - X
LED
output
8726
X
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-