Authorization Code; Answering A Call - NEC Inaset R2 User Manual

2-6 Features
Access Code ____________________________

Authorization Code____________________________

Authorization Code____________________________
NOTE
NOTE

Answering a Call

Internal call
External call
Authorization Code
To Enter an Authorization Code without an Account code
(Procedure 1):
• Lift handset or press the Speaker key, hear dial tone.
• Enter feature access code using the dial keys, hear
service set tone.
• Enter Authorization Code (up to 10 digits) using the
dial keys.
• Hear dial tone, dial desired number.
To Enter an Authorization Code without an Account code
(Procedure 2):
• Lift handset or press the Speaker key, hear dial tone.
• Dial desired number.
• If an Authorization Code is required, hear special dial
tone.
• Enter Authorization Code, or call will be denied.
Procedure 2 is available only if your PBX phone system is programmed with Least
Cost Routing.
The top of the INASET R2 Home Application window shows call information as the
call progresses or when a call function is used. An example display of this
information is shown at left (when applicable) for all call functions described in the
following.
Using the Handset
• Phone rings, ring indicator flashes. (Display shows
calling party.)
• Lift handset to answer, and begin conversation.
Hands Free (Speakerphone mode)
• Phone rings, ring indicator flashes.
• Press the Speaker key to answer, then press the Mic
key (Mic key light ON) and begin conversation.
INASET R2 User Guide - Revision 1