Authorization Code; Voice Call - NEC Univerge SV7000 User Manual

Authorization Code

To enter without account code
Lift handset or press Speaker , receive dial tone.
Enter feature access code, receive service set tone.
Enter "Authorization Code" (up to 10 digits).
Receive dial tone, dial desired number.
- Or -
Lift handset, receive dial tone.
Dial desired number.
If an "Authorization Code" is required, caller hears special dial tone.
Enter "Authorization Code", or call will be denied.
Note: This option is available only if system is programmed with Least Cost Routing.
To enter with account code (see above)
Service set tone is optional depending upon system programming.
Note: If a 16- or 32-button display terminal is used, the display indicates all of the digits dialed.

Voice Call

Lift handset
Dial desired station number.
Press Voice .
Speak to called party.
– 32 –
VOICE
(Time display)
2000