Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
INSTRUCTIONS FOR INSTALLATION
POSITIONING THE APPLIANCE
This appliance is classified as Class 3 and therefore is to be built into a kitchen unit
(depending on size) or 600mm wide worktop, providing the following minimum distance is
allowed:
-
700mm between the top surface and the underside of any horizontal surface above it.
-
50mm clearance around the appliance and combustible materials.
The surface finish of any adjacent unit must be capable of withstanding a minimum
temperature of 85°C.
PRE-COMMISSIONING THE APPLIANCE
When unpacked, check that the following parts are included with the appliance:
• Baumatic Ltd Instruction and Installation Book
• Pan Supports
• Burner Assemblies
• Adhesive sealing strip and fixing clamps & screws
• ½ BSP Elbow & Seal
• LPG conversion kit comprising an LPG jet for each burner and a self-adhesive label for
amending Gas Category on the appliance Rating Label.
8
Advertisement
Table of Contents
